From 988715910ce58e21c9ab56e1a3e7da64b6e0c0f5 Mon Sep 17 00:00:00 2001 From: Michael Overman Date: Fri, 1 Jan 2021 19:36:17 -0600 Subject: [PATCH] [Docs] Fix typo in hand_wire.md (#11297) --- docs/hand_wire.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/hand_wire.md b/docs/hand_wire.md index 0a4f0322c..badcd79b2 100644 --- a/docs/hand_wire.md +++ b/docs/hand_wire.md @@ -121,7 +121,7 @@ Letting the diode rest, grab your solder, and touch both it and the soldering ir The smoke that the rosin releases is harmful, so be careful not to breath it or get it in your eyes/face. -After soldering things in place, it may be helpful to blow on the joint to push the smoke away from your face, and cool the solder quicker. You should see the solder develop a matte (not shiny) surface as it solidifies. Keep in mind that it will still be very hot afterwards, and will take a couple minutes to be cool to touch. Blow on it will accelerate this process. +After soldering things in place, it may be helpful to blow on the joint to push the smoke away from your face, and cool the solder quicker. You should see the solder develop a matte (not shiny) surface as it solidifies. Keep in mind that it will still be very hot afterwards, and will take a couple minutes to be cool to touch. Blowing on it will accelerate this process. When the first diode is complete, the next one will need to be soldered to both the keyswitch, and the previous diode at the new elbow. That will look something like this: