qmk_firmware/keyboards/daji/seis_cinco
Ryan 9dcd03b6ca
Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956)
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps [Keyboard] Add Daji Seis Cinco (#11955) 2021-02-21 19:42:55 -08:00
chconf.h ChibiOS conf upgrade for daji/seis_cinco (#12001) 2021-02-25 07:23:29 +11:00
config.h [Keyboard] Add Daji Seis Cinco (#11955) 2021-02-21 19:42:55 -08:00
info.json [Keyboard] Add Daji Seis Cinco (#11955) 2021-02-21 19:42:55 -08:00
mcuconf.h ChibiOS conf upgrade for daji/seis_cinco (#12001) 2021-02-25 07:23:29 +11:00
readme.md [Keyboard] Add Daji Seis Cinco (#11955) 2021-02-21 19:42:55 -08:00
rules.mk Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00
seis_cinco.c [Keyboard] Add Daji Seis Cinco (#11955) 2021-02-21 19:42:55 -08:00
seis_cinco.h [Keyboard] Add Daji Seis Cinco (#11955) 2021-02-21 19:42:55 -08:00

readme.md

Daji Seis Cinco

  • Keyboard Maintainer: toraifu
  • Hardware Supported: Seis Cinco (non-RGB) PCB.
  • Hardware Availability: PCB bundled with Daji Seis Cinco.

Make example for this keyboard (after setting up your build environment):

make daji/seis_cinco:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.