qmk_firmware/keyboards/melgeek/mj64
Ryan 9dcd03b6ca
Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956)
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps [Keyboard] Melgeek MJ64 (#10425) 2020-10-16 15:18:06 -07:00
rev1 Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00
rev2 Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00
rev3 Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00
config.h [Keyboard] Melgeek MJ64 (#10425) 2020-10-16 15:18:06 -07:00
info.json [Keyboard] Melgeek MJ64 (#10425) 2020-10-16 15:18:06 -07:00
mj64.c [Keyboard] Melgeek MJ64 (#10425) 2020-10-16 15:18:06 -07:00
mj64.h [Keyboard] Melgeek MJ64 (#10425) 2020-10-16 15:18:06 -07:00
readme.md [Keyboard] Melgeek MJ64 (#10425) 2020-10-16 15:18:06 -07:00

readme.md

MelGeek MJ64

MJ64

A hotswap 60% RGB Custom Mechanical keyboard with arrow.

  • Keyboard Maintainer: melgeek001365
  • Hardware Supported: MJ64 V1.0.2 20200612
  • Hardware Availability: MelGeek

Make example for this keyboard (after setting up your build environment):

make melgeek/mj64/rev1:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.