qmk_firmware/keyboards/melgeek/mj65
Ryan 9dcd03b6ca
Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956)
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps [Keyboard] Support MJ65 - a 65% RGB Hotswap keyboard (#11764) 2021-02-11 16:56:07 -08:00
rev3 Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00
config.h [Keyboard] Support MJ65 - a 65% RGB Hotswap keyboard (#11764) 2021-02-11 16:56:07 -08:00
info.json [Keyboard] Support MJ65 - a 65% RGB Hotswap keyboard (#11764) 2021-02-11 16:56:07 -08:00
mj65.c [Keyboard] Support MJ65 - a 65% RGB Hotswap keyboard (#11764) 2021-02-11 16:56:07 -08:00
mj65.h [Keyboard] Support MJ65 - a 65% RGB Hotswap keyboard (#11764) 2021-02-11 16:56:07 -08:00
readme.md [Keyboard] Support MJ65 - a 65% RGB Hotswap keyboard (#11764) 2021-02-11 16:56:07 -08:00

readme.md

MelGeek MJ65

MJ65

A hotswap 65% RGB Custom Mechanical keyboard with arrow.

  • Keyboard Maintainer: melgeek001365
  • Hardware Supported: MJ65 REV3 20210120
  • Hardware Availability: MelGeek

Make example for this keyboard (after setting up your build environment):

make melgeek/mj65/rev3:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.