qmk_firmware/keyboards/speedo
ridingqwerty d2e1cc4d48
Trim firmware sizes from default rules.mk, part 3 (#8045)
2020-01-30 11:13:49 -08:00
..
keymaps/default Remove/migrate action_get_macro()s from default keymaps (#5625) 2019-07-15 23:04:02 -07:00
config.h Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE (#5997) 2019-06-06 12:09:56 -07:00
info.json Fix Speedo keyboard dimensions in info.json 2019-04-13 01:27:41 -07:00
readme.md Modified URLs to point to new locations 2019-01-13 09:11:18 -08:00
rules.mk Trim firmware sizes from default rules.mk, part 3 (#8045) 2020-01-30 11:13:49 -08:00
speedo.c Add the Speedo keyboard 2018-04-07 12:56:21 -04:00
speedo.h Speedo refactor and Configurator support (#3309) 2018-07-04 18:06:04 -07:00

readme.md

Speedo

Speedo

Keyboard Maintainer: Paul Ewing
Hardware Supported: Teensy 2.0
Hardware Availability: You will have to get the plates cut by an online service such as Ponoko. Case files are available in the Speedo Repository.

Make example for this keyboard (after setting up your build environment):

make speedo:default

See build environment setup then the make instructions for more information.

Flashing the Firmware

See the QMK docs for handwiring a keyboard; there is a section with instructions on how to flash the .hex file to the Teensy 2.0 controller.