qmk_firmware/keyboards/cheshire/curiosity
Ryan 9dcd03b6ca
Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956)
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps [Keymap] Updates - Unikorn/Curiosity/Prime_E/Ferris/Corne (#10925) 2020-11-25 10:09:15 -08:00
chconf.h ChibiOS conf migrations... take 11 (#11646) 2021-01-21 17:00:53 +11:00
config.h Remove `DESCRIPTION`, B-D (#11513) 2021-01-15 05:00:04 +11:00
curiosity.c New PCB - Curiosity - Alice Layout PCB (#7725) 2019-12-31 02:29:36 +11:00
curiosity.h Rework LAYOUT_alice support; add LAYOUT_alice_split_bs (#11106) 2020-12-03 14:07:41 -08:00
info.json Rework LAYOUT_alice support; add LAYOUT_alice_split_bs (#11106) 2020-12-03 14:07:41 -08:00
readme.md New PCB - Curiosity - Alice Layout PCB (#7725) 2019-12-31 02:29:36 +11:00
rules.mk Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00

readme.md

Cheshire Curiosity PCB

Cheshire Alice Keyboard Replacement PCB

  • Keyboard Maintainer: sidcarter
  • Hardware Supported: Cheshire Curiosity PCB, STM32F072CBT6
  • Designed By: Nightingale Studios/PhoenixStarr

Make example for this keyboard (after setting up your build environment):

make cheshire/curiosity:default:flash

If you are flashing this keyboard/pcb for the first time:

* Set the dip switch on the reverse of the PCB to 1
* Hit the reset button and then do
* make cheshire/curiosity:default
* After flashing the keyboard successfully, you can reset the dip switch back to 0

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.