qmk_firmware/keyboards/dztech/dz60rgb
Drashna Jaelre 92385b3fb6 Better handle LTO_ENABLE (#9832)
* Better handle LTO_ENABLE

Especially when calling from command line

* Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE

* Remove long for LTO from show_options.mk
2020-08-29 14:30:02 -07:00
..
keymaps Better handle LTO_ENABLE (#9832) 2020-08-29 14:30:02 -07:00
v1 Remove HD44780 References, Part 2 (#9918) 2020-08-07 02:06:14 -07:00
v2 Remove HD44780 References, Part 2 (#9918) 2020-08-07 02:06:14 -07:00
config.h Tidy up dztech config.h 2019-12-18 10:23:26 +11:00
dz60rgb.c Fix compilation warning for the DZ60RGB/DZ65RGB when RGB matrix is disabled (#9791) 2020-07-22 15:55:35 +10:00
dz60rgb.h Tidy up dztech keyboard.c/h and readmes (#7664) 2020-01-14 08:49:31 +11:00
info.json Tidy up dztech default keymaps and info.json (#7608) 2019-12-18 10:15:47 +11:00
readme.md Tidy up dztech keyboard.c/h and readmes (#7664) 2020-01-14 08:49:31 +11:00

readme.md

DZ60RGB

dz60rgb

A hotswap 60% RGB keyboard.

  • Keyboard Maintainer: moyi4681
  • Hardware Supported: DZtech DZ60RGB V1 and V2
  • Hardware Availability: KBDfans

There are two versions of the DZ60RGB. Please use the appropriate firmware for your board.

  • V1: STM32F303 (Arm), takes .bin files
  • V2: ATmega32U4 (AVR), takes .hex files

Make example for this keyboard (after setting up your build environment):

make dztech/dz60rgb/v1:default # Arm (STM32F303)
make dztech/dz60rgb/v2:default # AVR (ATmega32U4)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.