qmk_firmware/keyboards/ymd75
James Young d88dca3ca7
YMD75: move MCU/Bootloader rules to revision level (#9452)
Work-around for an issue with QMK Configurator's API.
2020-06-18 00:15:22 -07:00
..
keymaps/default Add support for YMD75 rev 2 (#8853) 2020-04-20 00:58:58 +01:00
rev1 YMD75: move MCU/Bootloader rules to revision level (#9452) 2020-06-18 00:15:22 -07:00
rev2 YMD75: move MCU/Bootloader rules to revision level (#9452) 2020-06-18 00:15:22 -07:00
README.md Add support for YMD75 rev 2 (#8853) 2020-04-20 00:58:58 +01:00
config.h Add support for YMD75 rev 2 (#8853) 2020-04-20 00:58:58 +01:00
info.json Added YMD75 support (#2968) 2018-05-14 09:43:12 -07:00
rules.mk YMD75: move MCU/Bootloader rules to revision level (#9452) 2020-06-18 00:15:22 -07:00
ymd75.c Add support for YMD75 rev 2 (#8853) 2020-04-20 00:58:58 +01:00
ymd75.h Add support for YMD75 rev 2 (#8853) 2020-04-20 00:58:58 +01:00

README.md

YMD75 / MT84

75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.

Make example for this keyboard (after setting up your build environment):

make ymd75/rev1:default

Flashing example for this keyboard (after setting up the bootloadHID flashing environment)

make ymd75/rev1:default:flash

Reset Key: Hold down the key located at Key below the top right key, commonly programmed as Backspace while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding L_CTRL while plugging in the keyboard.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.