qmk_firmware/keyboards/carbo65
Ryan 9dcd03b6ca
Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956)
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps [Keyboard] Carbo65 (#12406) 2021-04-19 21:12:48 -07:00
carbo65.c [Keyboard] Carbo65 (#12406) 2021-04-19 21:12:48 -07:00
carbo65.h [Keyboard] Carbo65 (#12406) 2021-04-19 21:12:48 -07:00
config.h [Keyboard] Carbo65 (#12406) 2021-04-19 21:12:48 -07:00
info.json [Keyboard] Carbo65 (#12406) 2021-04-19 21:12:48 -07:00
readme.md [Keyboard] Carbo65 (#12406) 2021-04-19 21:12:48 -07:00
rules.mk Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00

readme.md

Carbo 65

This is a standard 65% layout PCB. It supports VIA.

Instructions

Build

Make example for this keyboard (after setting up your build environment):

make carbo65:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Reset

  • Unplug
  • Hold Escape
  • Plug In
  • Unplug
  • Release Escape

Flash

  • Unplug
  • Hold Escape
  • Plug In
  • Flash using QMK Toolbox or CLI (make carbo65:<keymap>:flash)