kenbarbour
/
uweather_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
The firmware for uWeather, an ESP8266-based weather station
27 Commits
4 Branches
4 Tags
230 KiB
JavaScript 51%
C++ 36.8%
C 7.1%
Shell 3.5%
SCSS 1.1%
Other 0.5%
 
 
 
 
 
 
Go to file
Kenneth Barbour 3c704ff51b basic working mdns configuration 2020-06-21 16:35:17 -04:00
bin web frontend for configuration and local weather display 2020-01-06 16:22:59 -05:00
frontend Merge branch 'develop' into feature/battery-monitoring 2020-06-20 17:11:34 -04:00
include Initial commit 2019-12-18 13:48:02 -05:00
lib Initial commit 2019-12-18 13:48:02 -05:00
src basic working mdns configuration 2020-06-21 16:35:17 -04:00
test Initial commit 2019-12-18 13:48:02 -05:00
.gitignore ignore data directory 2020-01-06 21:11:03 -05:00
.travis.yml Initial commit 2019-12-18 13:48:02 -05:00
README.markdown some rough instructions in a README 2020-06-12 21:49:27 -04:00
platformio.ini report the current weather 2020-01-24 10:49:34 -05:00

README.markdown

uWeather Firmware

Firmware for a small Arduino/ESP8266 + BME280 Weather Station

Build/Install

pio run -t upload, then pio run -t uploadfs to build and upload code and filesystem for the first time, while connected over USB/Serial.

If station is connected to wifi, uploading over the air is preferred: pio run -t upload --upload-port 192.168.1.72 (substituting the station's IP address)

Initial Station Setup

After installing firmware and booting for the first time:

  1. Using a smartphone or laptop, connect to the station's WiFi Access Point
  2. Access the setup page from 192.168.1.4/setup
  3. Enter WiFi configuration and station settings
  4. Optionally commit config settings to EEPROM(WiFi is automatically committed) by POST-ing to /config/commit
  5. Restart the weather station

TODO

  • Responses from config api calls don't properly fill form elements after saving