continued manufacturing instructions
parent
dd91bf48db
commit
bb4b526e0f
|
@ -27,14 +27,46 @@ collet using a general purpose carbide turning and facing tool and a
|
|||
3. Tap M4x0.7.
|
||||
|
||||
#### Operation 3
|
||||
1. Instert part into a 3 jaw chuck or collet with parted end pacing
|
||||
1. Insert part into a 3 jaw chuck or collet with parted end facing
|
||||
tailstock.
|
||||
2. Take a small facing cut to clean parted end.
|
||||
3. Use a forming tool or file to produce the radius.
|
||||
|
||||
### Tip
|
||||
#### Operation 1
|
||||
1. On the lathe, chuck a .375 303 SS Round bar about 1.75 inches from
|
||||
the chuck jaws.
|
||||
2. Face off (zero the Z-axis dial).
|
||||
3. Turn to Z=-.433 to a diameter of .306 - .313 (zero X-axis dial).
|
||||
4.
|
||||
4. __THREAD RELIEF__.
|
||||
5. __CENTER DRILL__.
|
||||
6. __PART__.
|
||||
|
||||
#### Operation 2
|
||||
1. Insert part into a 3 jaw chuck or collet on the raw stock diameter
|
||||
with the machined end facing tailstock.
|
||||
2. Drill through with a long 3mm drill.
|
||||
3. Drill to a depth of .866 with a 5mm drill.
|
||||
4. Tap M8x1.25 to the shoulder
|
||||
5. Deburr with file and countersink.
|
||||
|
||||
### Body
|
||||
#### Operation 1
|
||||
|
||||
### Cap
|
||||
#### Operation 1
|
||||
|
||||
#### Operation 2
|
||||
|
||||
## Assembly
|
||||
### Body & Tip Assembly
|
||||
1. Mount Body in a 3 jaw chuck or collet with the threaded end facing
|
||||
tailstock.
|
||||
2. Zero the Z-axis dial on the Body.
|
||||
3. Screw tip into threaded end of the Body.
|
||||
4. Face the tip at Z=+.906.
|
||||
5. With compound set to 6.5° (13° included), turn a taper
|
||||
that starts fully at Z=-.049.
|
||||
6. Deburr and polish.
|
||||
|
||||
### Click Mechanism and Cap assembly
|
||||
|
|
Loading…
Reference in New Issue